Heat Pump List
Menu

Sections

Tools

NTXSKH15A112AA

NTXSKH15A112AA is in the certified data.

Its certified full-speed heating output at 5°F is 7,000–16,400 Btu/h, 43–100% of its 47°F rating (tests at different compressor speeds), depending on the pairing.

Trane / Mitsubishi Electric · mini-split heat pump

All 136 certified Trane / Mitsubishi Electric models

NTXSKH15A112AA is in the certified data as of Sep 19, 2026. NTXSKH15A112AA returned to the certified data between May 2025 and June 2025.

2 certified pairings with 2 different figures. See all

Heating at 47°F

16,400

9,700 at 17°F

7,000 at 5°F

Btu/h, certified

1.51 COP at 5°F

Cooling at 95°F

13,700

Btu/h, certified

EER2 12.4 at 95°F

SEER2 17.5

Heating and cooling by outdoor temperature

Certified heating at 5, 17, and 47°F and cooling at 95°F for NTXSKH15A112AA, by outdoor temperature Heating: 7,000 Btu/h at 5°F, 9,700 Btu/h at 17°F, 16,400 Btu/h at 47°F. Cooling: 13,700 Btu/h at 95°F. The bars start at zero. Median of 15,000 Btu mini-split models: 14,000 Btu/h at 5°F, 12,000 Btu/h at 17°F, 16,000 Btu/h at 47°F, 15,000 Btu/h at 95°F. 0 5,000 10,000 15,000 20,000 Btu/h 7,000 5°F 9,700 17°F 16,400 47°F 13,700 95°F Outdoor temperature (°F)
  • Heating output
  • Cooling output
  • Median of 15,000 Btu mini-split models
  • Example heating load
  • Example cooling load
  • Frosting range, 17 to 45°F

This pairing delivers 16,400 Btu/h of heat at 47°F, 9,700 Btu/h at 17°F, and 7,000 Btu/h at 5°F, 43% of its 47°F rating. It delivers 13,700 Btu/h of cooling at 95°F. At 5°F that is 7,000 Btu/h short of the example heating load of 14,000 Btu/h; at 95°F it is 6,700 Btu/h above the example cooling load of 7,000 Btu/h.

Each bar is a separate certified test, drawn at its outdoor temperature, starting at zero. The 47°F figure is at normal speed; the 17 and 5°F figures are at full speed. The short dark line on each bar is the median of 15,000 Btu mini-split models, one value per model. The shaded 17 to 45°F band is the frosting range: the outdoor coil can frost, and the unit pauses to defrost.

The dashed lines are example loads for a typical area of about 600 sq ft where winters reach 5°F: heating runs from 14,000 Btu/h at 5°F to 0 at 65°F, and cooling runs from 0 at 65°F to 7,000 Btu/h at 95°F, at 1,000 sq ft per ton. A house in a hot climate or with large west-facing windows can need twice as much cooling. They are examples, not your building.

Calculate heating and cooling for your house

AHRI certificate 211497089 · listed by Trane / Mitsubishi Electric · certified Mar 24, 2026 · 1 pairing carries these values

Rebates where you live

Meets the recorded equipment thresholds of 19 programs in 10 states, provinces, or territories:Arizona (1), California (2), Colorado (1), Idaho (1), Maryland (3), Mississippi (1), New Jersey (4), Oregon (1), Pennsylvania (4), Texas (2).

All 19 programs by state and province

Arizona

California

Colorado

Idaho

Maryland

Mississippi

New Jersey

Oregon

Pennsylvania

Texas

Threshold comparisons use the unit’s median certified figures across its pairings, not the pairing selected above. Meeting these thresholds means the equipment may qualify; it does not guarantee approval. Service-area, installation, and product-list requirements also apply.

All rebate programs and their published thresholds

Certified output and power use

Certified output for the selected pairingThe four bars share one scale. The comparison is with the median of 15,000 Btu mini-split models. Heating tests run at 70°F indoors. The cooling test runs at 80°F indoors.
Outdoor temperature Certified outputBtu/h One scale vs class median COPat 5°F
5°Ffull speed 7,0002.05 kW −50% 1.51
17°Ffull speed 9,7002.84 kW −19% NR
47°Fnormal speed 16,4004.81 kW +3% NR
95°Fcooling, full load 13,7004.02 kW — NR

EER2 12.4 in that test. SEER2 17.5 over the modeled cooling season.

Power use at each temperature

Electrical input in the 5°F full-speed test
1.36kW
Electrical input in the 95°F cooling test
1.10kW
Seasonal average heating COP
2.32

These exclude backup resistance heat.

Updated Sep 19, 2026 · Methodology

How it compares with other 15,000 Btu heat pumps

15,000 Btu mini-split models

This pairing at 5°F
7,000 Btu/h
This unit at 5°F median across its pairings
7,000 Btu/h
Median of 15,000 Btu mini-split models at 5°F
14,000 Btu/h
Models in this group
98

This unit is above 3% of them, at number 95 of 98 by heat at 5°F. The middle half of the group runs 12,300 to 17,500 Btu/h.

This size class is defined by cooling capacity, so cooling is not compared here.

Among 15,000 Btu mini-split models, each by its median certified pairing, highest first: 5°F output as a share of its 47°F rating, 82nd of 98; HSPF2, 104th of 104. Models without that figure are left out.

Similar ratings at 47°F

These mini-split models share the nominal cooling size. Comparisons use each model’s median certified figures across pairings.

  • SUZ-KA15NAHZ: The same 16,400 Btu/h rating at 47°F; 16,400 Btu/h at 5°F (this model: 7,000).
  • SUZ-KA15NA2: The same 16,400 Btu/h rating at 47°F; 9,400 Btu/h at 5°F (this model: 7,000).
  • MUZ-FX15NLHZ: 16,500 Btu/h at 47°F (this model: 16,400); 22,200 Btu/h at 5°F (this model: 7,000).

Closest models by heat at 5°F

Every 15,000 Btu unit, ranked by cooling efficiency, then heating efficiency

Floor area at the cold test point

The median certified output of 7,000 Btu/h at 5°F matches the size calculator’s heating estimate for these floor areas, rounded to about 10 sq ft. Each range divides that output by the climate band’s heating rates.

Floor area by climate band and house condition
Climate bandHouse conditionBtu/h per sq ftApproximate sq ft
MildDrafty, little insulation24–42170–290
MildTypical16–26270–440
MildTight, well insulated10–18390–700
ColdDrafty, little insulation28–52130–250
ColdTypical18–30230–390
ColdTight, well insulated12–22320–580
Very coldDrafty, little insulation32–58120–220
Very coldTypical22–38180–320
Very coldTight, well insulated16–28250–440

This is an estimate, not a house-specific load calculation. Output stays at the 5°F test point for every band; it does not predict output at the band’s winter design temperature.

Certified values for NTXSKH15A112AA

2 pairings · 2 AHRI certificates

This pairing is the one shown above. Under all pairings, a single figure means every pairing agrees and a range means the pairing decides.

This pairingAll pairings
Heating
Heat output at 47°F normal speed 16,400 Btu/h 16,400 Btu/h
Heat output at 17°F full speed 9,700 Btu/h 9,700 Btu/h
Heat output at 5°F full speed 7,000 Btu/h 7,000–16,400 Btu/h
Heat output below 5°F NR NR
Cold output 5°F output as a % of the 47°F rating 43%
COP at 5°F full speed 1.51 1.51–1.84
HSPF2 Region IV 7.9 7.9
Cooling
Cooling capacity at 95°F full-load test 13,700 Btu/h 13,700 Btu/h
EER2 at 95°F 12.4 12.4
SEER2 cooling season 17.5 17.5
Cooling at other temperatures NR NR
Equipment and listing
Refrigerant R-410A
Compressor Variable speed
Indoor unit NTXCKS15A112** 2 indoor units
FurnaceNo furnace None
Cold-climate designation EPA's designation, as published NC NC
ENERGY STAR Most Efficient EPA's designation, as published No On no pairings
Where it is sold United States United States
Model string as certified NTXSKH15A112AA

Across 2 certified pairings with 2 indoor models: heat at 5°F 7,000 Btu/h with NTXCKS15A112** to 16,400 Btu/h with SLZ-KF15NA; HSPF2 7.9 throughout; SEER2 17.5 throughout. Endpoints name one indoor model where recorded; the furnace pairing can also change the figures.

Pairings, by indoor-unit class

2 indoor units · 2 certified pairings

One row per indoor unit certified with this outdoor unit.

Ductless indoor · 2 indoor units

  1. NTXCKS15A112** Trane / Mitsubishi Electric 7,000 Btu/hat 5°F, full speed

    1 pairing · 47°F 16,400 Btu/h · 95°F cooling 13,700 Btu/h · Cold output 43% · COP 1.51

  2. SLZ-KF15NA Trane / Mitsubishi Electric 16,400 Btu/hat 5°F, full speed

    1 pairing · 47°F 16,400 Btu/h · 95°F cooling 13,700 Btu/h · Cold output 100% · COP 1.84

Indoor units in the ductless indoor class
Indoor unit Brand At 5°FBtu/h · full speed At 47°FBtu/h · normal speed At 95°FBtu/h · cooling Cold output% of 47°F rating COP 5°Ffull speed Cold climate Pairings
NTXCKS15A112** Trane / Mitsubishi Electric 7,000 16,400 13,700 43% 1.51 NC 1
SLZ-KF15NA Trane / Mitsubishi Electric 16,400 16,400 13,700 100% 1.84 NC 1

The share is heat output at 5°F divided by the 47°F rating.

Showing 2 of 2 indoor units

Sold as, and units with identical certified values

Brands listing this model number

Model number as listed

  • NTXSKH15A112AA 2 pairings

What affects the price

We don't have prices. These things drive the cost.

  • The size of the unit, and the indoor equipment on the same certificate.
  • Whether existing ductwork is reused, altered, or replaced.
  • The electrical work: a circuit, a disconnect, and sometimes a panel change.
  • Refrigerant line length and how the outdoor unit is mounted.
  • Permits and inspection, which vary by municipality.
  • Removing and disposing of the old equipment.
  • Local labor rates and how busy the season is.
  • Rebates and tax credits, which change and have deadlines.

Product history

  • NTXSKH15A112AA returned to the certified data between May 2025 and June 2025.
  • NTXSKH15A112AA was last in the certified data in records from March 2025; it was not in the list on May 20, 2025.
  • NTXSKH15A112AA was in the certified data by September 2024.

History and definitions

Other NV-Series models by nominal cooling size: MUZ-HM09NA (9,000 Btu), MUZ-JP09WA (9,000 Btu), MUZ-WR09NA (9,000 Btu), NTXSEL09A112A (9,000 Btu), NTXSKH09A112 (9,000 Btu), NTXSKH09A112AA (9,000 Btu), NTXSKS09A112 (9,000 Btu), NTXSKS09A112AA (9,000 Btu); more models from this brand.

History

First certified record
Most recent certified record
Measurements reported
Mar 24, 2026
Status
In the certified data

Field definitions

COP
Heat delivered for each unit of electricity used. A COP of 2.5 gives 2.5 times the heat of an electric baseboard heater.
HSPF2
Heating efficiency over a typical season. Higher uses less electricity.
SEER2
Cooling efficiency over a typical season. Higher uses less electricity.
EER2
Cooling output divided by electrical input in the 95°F full-load test, in Btu/h per watt.
Cold output
Heat output at 5°F as a percentage of the 47°F rating.
% of rating at 17°F
Heat output at 17°F as a percentage of the 47°F rating.

NR not in the certified dataNC not cold-climate certifiedSP single pairing onlyVP varies by pairing; see the pairings tableWD withdrawn since the certified data was last read

Cite or print this page

Heat Pump List, “NTXSKH15A112AA — certified heat output”. Certified figures dated , checked daily.
https://heatpumplist.com/model/ntxskh15a112aa