Heat Pump List
Menu

Sections

Tools

5HPL5024A1

5HPL5024A1 is in the certified data.

Its certified full-speed heating output at 5°F is 18,000–19,000 Btu/h, 78–90% of its 47°F rating (tests at different compressor speeds), depending on the pairing.

American Standard and Trane · central heat pump

All 88 certified American Standard models · All 104 certified Trane models

5HPL5024A1 is in the certified data as of Sep 19, 2026.

60 certified pairings with 6 different figures. See all

Heating at 47°F

22,000

20,000 at 17°F

19,000 at 5°F

Btu/h, certified

1.80 COP at 5°F

Cooling at 95°F

21,000

Btu/h, certified

EER2 11.7 at 95°F

SEER2 15.2

Heating and cooling by outdoor temperature

Certified heating at 5, 17, and 47°F and cooling at 95°F for 5HPL5024A1, by outdoor temperature Heating: 19,000 Btu/h at 5°F, 20,000 Btu/h at 17°F, 22,000 Btu/h at 47°F. Cooling: 21,000 Btu/h at 95°F. The bars start at zero. Median of 1.5-ton central models: 11,200 Btu/h at 5°F, 12,600 Btu/h at 17°F, 18,000 Btu/h at 47°F, 18,000 Btu/h at 95°F. 0 5,000 10,000 15,000 20,000 25,000 Btu/h 19,000 5°F 20,000 17°F 22,000 47°F 21,000 95°F Outdoor temperature (°F)
  • Heating output
  • Cooling output
  • Median of 1.5-ton central models
  • Example heating load
  • Example cooling load
  • Frosting range, 17 to 45°F

This pairing delivers 22,000 Btu/h of heat at 47°F, 20,000 Btu/h at 17°F, and 19,000 Btu/h at 5°F, 86% of its 47°F rating. It delivers 21,000 Btu/h of cooling at 95°F. At 5°F that is 8,000 Btu/h above the example heating load of 11,000 Btu/h; at 95°F it is 15,500 Btu/h above the example cooling load of 5,500 Btu/h.

Each bar is a separate certified test, drawn at its outdoor temperature, starting at zero. The 47°F figure is at high stage; the 17 and 5°F figures are at full speed. The short dark line on each bar is the median of 1.5-ton central models, one value per model. The shaded 17 to 45°F band is the frosting range: the outdoor coil can frost, and the unit pauses to defrost.

The dashed lines are example loads for a typical area of about 450 sq ft where winters reach 5°F: heating runs from 11,000 Btu/h at 5°F to 0 at 65°F, and cooling runs from 0 at 65°F to 5,500 Btu/h at 95°F, at 1,000 sq ft per ton. A house in a hot climate or with large west-facing windows can need twice as much cooling. They are examples, not your building.

Calculate heating and cooling for your house

AHRI certificate 217194721 · listed by Trane · certified Apr 9, 2025 · 34 pairings share these values

Rebates where you live

Meets the recorded equipment thresholds of 41 programs in 24 states, provinces, or territories:California (1), Colorado (2), Connecticut (3), Idaho (2), Illinois (1), Kansas (1), Maryland (3), Massachusetts (3), Michigan (2), Minnesota (3), Mississippi (1), Nevada (1), New Hampshire (3), New Jersey (4), North Carolina (1), Oregon (2), Pennsylvania (3), Rhode Island (1), South Carolina (1), Texas (3), Utah (1), Washington (3), Wisconsin (1), Newfoundland and Labrador (1).

All 41 programs by state and province

California

Colorado

Connecticut

Idaho

Illinois

Kansas

Maryland

Massachusetts

Michigan

Minnesota

Mississippi

Nevada

New Hampshire

New Jersey

North Carolina

Oregon

Pennsylvania

Rhode Island

South Carolina

Texas

Utah

Washington

Wisconsin

Newfoundland and Labrador

Threshold comparisons use the unit’s median certified figures across its pairings, not the pairing selected above. Meeting these thresholds means the equipment may qualify; it does not guarantee approval. Service-area, installation, and product-list requirements also apply.

All rebate programs and their published thresholds

Certified output and power use

Certified output for the selected pairingThe four bars share one scale. The comparison is with the median of 1.5-ton central models. Heating tests run at 70°F indoors. The cooling test runs at 80°F indoors.
Outdoor temperature Certified outputBtu/h One scale vs class median COPat 5°F
5°Fone compressor speed 19,0005.57 kW +70% 1.80
17°Fone compressor speed 20,0005.86 kW +59% NR
47°Fone compressor speed 22,0006.45 kW +22% NR
95°Fcooling, full load 21,0006.15 kW — NR

EER2 11.7 in that test. SEER2 15.2 over the modeled cooling season.

Power use at each temperature

Electrical input in the 5°F full-speed test
3.09kW
Electrical input in the 95°F cooling test
1.79kW
Seasonal average heating COP
2.37

These exclude backup resistance heat.

Updated Sep 19, 2026 · Methodology

How it compares with other 18,000 Btu heat pumps

1.5-ton central models

This pairing at 5°F
19,000 Btu/h
This unit at 5°F median across its pairings
19,000 Btu/h
Median of 1.5-ton central models at 5°F
11,200 Btu/h
Models in this group
243

This unit is above 95% of them, at number 11 of 243 by heat at 5°F. The middle half of the group runs 8,600 to 18,000 Btu/h.

This size class is defined by cooling capacity, so cooling is not compared here.

Among 18,000 Btu central models, each by its median certified pairing, highest first: 5°F output as a share of its 47°F rating, 77th of 243 (tied); HSPF2, 155th of 254 (tied). Models without that figure are left out.

Similar ratings at 47°F

These central models share the nominal cooling size. Comparisons use each model’s median certified figures across pairings.

  • GHO18H52ACXL05: The same 22,000 Btu/h rating at 47°F; HSPF2 9.0 (this model: 8.1).
  • RD18AY24AJVC: 21,000 Btu/h at 47°F (this model: 22,000); 17,000 Btu/h at 5°F (this model: 19,000).
  • DIYH-18-HP-C-230C25: 20,000 Btu/h at 47°F (this model: 22,000); HSPF2 10.0 (this model: 8.1).

Closest models by heat at 5°F

Every 18,000 Btu (1.5-ton) unit, ranked by cooling efficiency, then heating efficiency

Floor area at the cold test point

The median certified output of 19,000 Btu/h at 5°F matches the size calculator’s heating estimate for these floor areas, rounded to about 10 sq ft. Each range divides that output by the climate band’s heating rates.

Floor area by climate band and house condition
Climate bandHouse conditionBtu/h per sq ftApproximate sq ft
MildDrafty, little insulation24–42450–790
MildTypical16–26730–1,190
MildTight, well insulated10–181,060–1,900
ColdDrafty, little insulation28–52370–680
ColdTypical18–30630–1,060
ColdTight, well insulated12–22860–1,580
Very coldDrafty, little insulation32–58330–590
Very coldTypical22–38500–860
Very coldTight, well insulated16–28680–1,190

This is an estimate, not a house-specific load calculation. Output stays at the 5°F test point for every band; it does not predict output at the band’s winter design temperature.

Certified values for 5HPL5024A1

60 pairings · 60 AHRI certificates

This pairing is the one shown above. Under all pairings, a single figure means every pairing agrees and a range means the pairing decides.

This pairingAll pairings
Heating
Heat output at 47°F high stage 22,000 Btu/h 21,200–23,000 Btu/h
Heat output at 17°F full speed 20,000 Btu/h 19,000–21,000 Btu/h
Heat output at 5°F full speed 19,000 Btu/h 18,000–19,000 Btu/h
Heat output below 5°F NR NR
Cold output 5°F output as a % of the 47°F rating 86%
COP at 5°F full speed 1.80 1.75–1.80
HSPF2 Region IV 8.1 8.1
Cooling
Cooling capacity at 95°F full-load test 21,000 Btu/h 21,000–23,000 Btu/h
EER2 at 95°F 11.7 11.7
SEER2 cooling season 15.2 15.2–16.0
Cooling at other temperatures NR NR
Equipment and listing
Refrigerant R-454B
Compressor Two-stage
Indoor unit 5TXCB003AS3 4 indoor units
FurnaceS8V2B080M4PCB 25 furnaces
Cold-climate designation EPA's designation, as published Yes On every pairing
ENERGY STAR Most Efficient EPA's designation, as published No On no pairings
Where it is sold US and Canada US and Canada
Model string as certified 5HPL5024A1

Across 60 certified pairings with 4 indoor models: heat at 5°F 18,000 Btu/h with 5TEM6B02AV21+TDR to 19,000 Btu/h with 5PXCBD03AS3; HSPF2 8.1 throughout; SEER2 15.2 with 5PXCBD03AS3 to 16.0 with 5TEM6B02AV21+TDR. Endpoints name one indoor model where recorded; the furnace pairing can also change the figures.

Pairings, by indoor-unit class

4 indoor units · 60 certified pairings

One row per indoor unit certified with this outdoor unit.

Furnace paired · 3 indoor units

  1. 5TXCB003AS3 brand not stated 19,000 Btu/hat 5°F, full speed

    44 pairings, 22 with a furnace · 47°F 22,000 Btu/h · 95°F cooling 21,000 Btu/h · Cold output 86% · COP 1.80

  2. 5PXCBD03AS3 brand not stated 19,000 Btu/hat 5°F, full speed

    8 pairings, 4 with a furnace · 47°F 22,000 Btu/h · 95°F cooling 21,000 Btu/h · Cold output 86% · COP 1.80

  3. 5TXCC005AS3 brand not stated 19,000 Btu/hat 5°F, full speed

    6 pairings, 3 with a furnace · 47°F 22,000 Btu/h · 95°F cooling 22,000 Btu/h · Cold output 86% · COP 1.80

Indoor units in the furnace paired class
Indoor unit Brand At 5°FBtu/h · full speed At 47°FBtu/h · high stage At 95°FBtu/h · cooling Cold output% of 47°F rating COP 5°Ffull speed Cold climate Pairings
5TXCB003AS3 — 19,000 22,000 21,000 86% 1.80 Yes 44
5PXCBD03AS3 — 19,000 22,000 21,000 86% 1.80 Yes 8
5TXCC005AS3 — 19,000 22,000 22,000 86% 1.80 Yes 6

Air handler · 1 indoor unit

  1. 5TEM6B02AV21+TDR brand not stated 18,000 Btu/hat 5°F, full speed

    2 pairings · 47°F 23,000 Btu/h · 95°F cooling 23,000 Btu/h · Cold output 78% · COP 1.75

Indoor units in the air handler class
Indoor unit Brand At 5°FBtu/h · full speed At 47°FBtu/h · high stage At 95°FBtu/h · cooling Cold output% of 47°F rating COP 5°Ffull speed Cold climate Pairings
5TEM6B02AV21+TDR — 18,000 23,000 23,000 78% 1.75 Yes 2

The share is heat output at 5°F divided by the 47°F rating.

Showing 4 of 4 indoor units

Sold as, and units with identical certified values

Brands listing this model number

Other brands that list these model numbers

Model number as listed

  • 5HPL5024A1 60 pairings

Variants of the same model number

3 units in this group. Basis: identical certified values in the certified data. This grouping is our inference, not a field in the certified data.

2 of 3 shown.

What affects the price

We don't have prices. These things drive the cost.

  • The size of the unit, and the indoor equipment on the same certificate.
  • Whether existing ductwork is reused, altered, or replaced.
  • The electrical work: a circuit, a disconnect, and sometimes a panel change.
  • Refrigerant line length and how the outdoor unit is mounted.
  • Permits and inspection, which vary by municipality.
  • Removing and disposing of the old equipment.
  • Local labor rates and how busy the season is.
  • Rebates and tax credits, which change and have deadlines.

Product history

  • 5HPL5024A1 first appeared in the certified data between February 2025 and March 2025.

History and definitions

Other 5HPL5 models by nominal cooling size: 5HPL5024A1000AA (24,000 Btu), 5HPL5036A1 (30,000 Btu), 5HPL5036A1000AA (36,000 Btu), 5HPL5048A1 (42,000 Btu), 5HPL5048A1000AA (48,000 Btu).

History

First certified record
Most recent certified record
Measurements reported
Apr 9, 2025
Status
In the certified data

Field definitions

COP
Heat delivered for each unit of electricity used. A COP of 2.5 gives 2.5 times the heat of an electric baseboard heater.
HSPF2
Heating efficiency over a typical season. Higher uses less electricity.
SEER2
Cooling efficiency over a typical season. Higher uses less electricity.
EER2
Cooling output divided by electrical input in the 95°F full-load test, in Btu/h per watt.
Cold output
Heat output at 5°F as a percentage of the 47°F rating.
% of rating at 17°F
Heat output at 17°F as a percentage of the 47°F rating.

NR not in the certified dataNC not cold-climate certifiedSP single pairing onlyVP varies by pairing; see the pairings tableWD withdrawn since the certified data was last read

Cite or print this page

Heat Pump List, “5HPL5024A1 — certified heat output”. Certified figures dated , checked daily.
https://heatpumplist.com/model/5hpl5024a1