Heat Pump List
Menu

Sections

Tools

Cold-climate heat pumps for Wisconsin

Across the 783 ZIP-code areas in Wisconsin, the winter design temperature runs from −10°F to 1°F for most areas, with a median of −3°F.

The design temperature is the annual 99% value: only the coldest 88 hours of an average year fall below it. Each area takes it from the nearest weather station, 2015 to 2024.

Winter design temperatures across Wisconsin

ZIP-code areas in Wisconsin, by design temperature
Design temperature Areas Share
Below 5°FNo certified heating figure 783 100%
5 to 17°F 0 0%
17 to 47°F 0 0%
47°F and above 0 0%
Coldest areas in Wisconsin
Place ZIP code Design temperature
Butternut 54514 −13°F
Catawba 54515 −13°F
Glidden 54527 −13°F
Warmest areas in Wisconsin
Place ZIP code Design temperature
Brookfield 53005 4°F
Butler 53007 4°F
Cudahy 53110 4°F

Sizes certified to cover a typical house at −3°F

The size calculator uses 22 to 38 Btu/h per square foot for a typical house where the design temperature is below 0°F. Below 5°F the certified data has no figure. Sizes are compared on the 5°F full-speed test.

For each type: the smallest size class whose median model is certified to deliver the bottom of the range at 5°F, and the smallest that reaches the top. The medians count one value per model. Size classes are named by cooling capacity.

1,500 sq ft: 33,000 to 57,000 Btu/h

2,500 sq ft: 55,000 to 95,000 Btu/h

No single size class has a median model certified for 55,000 Btu/h at 5°F. A load this size is normally met by more than one system, or by zones.

Your own house

6,618 of 8,420 certified units carry EPA's cold-climate designation. Cold-climate heat pumps by size

Estimate for your house

Every state and province

States

Provinces