Heat Pump List
Menu

Sections

Tools

1824SPV0-HP-X-D

1824SPV0-HP-X-D is in the certified data.

Its certified full-speed heating output at 5°F is 12,800 Btu/h, 76% of its 47°F rating (tests at different compressor speeds) in its certified pairing.

Multi MFG · central heat pump

All 63 certified Multi MFG models

1824SPV0-HP-X-D is in the certified data as of Sep 19, 2026.

Heating at 47°F

16,800

10,500 at 17°F

12,800 at 5°F

Btu/h, certified

2.20 COP at 5°F

Cooling at 95°F

16,800

Btu/h, certified

EER2 9.8 at 95°F

SEER2 15.5

Heating and cooling by outdoor temperature

Certified heating at 5, 17, and 47°F and cooling at 95°F for 1824SPV0-HP-X-D, by outdoor temperature Heating: 12,800 Btu/h at 5°F, 10,500 Btu/h at 17°F, 16,800 Btu/h at 47°F. Cooling: 16,800 Btu/h at 95°F. The bars start at zero. Median of 1.5-ton central models: 11,200 Btu/h at 5°F, 12,600 Btu/h at 17°F, 18,000 Btu/h at 47°F, 18,000 Btu/h at 95°F. 0 5,000 10,000 15,000 20,000 Btu/h 12,800 5°F 10,500 17°F 16,800 47°F 16,800 95°F Outdoor temperature (°F)
  • Heating output
  • Cooling output
  • Median of 1.5-ton central models
  • Example heating load
  • Example cooling load
  • Frosting range, 17 to 45°F

This pairing delivers 16,800 Btu/h of heat at 47°F, 10,500 Btu/h at 17°F, and 12,800 Btu/h at 5°F, 76% of its 47°F rating. It delivers 16,800 Btu/h of cooling at 95°F. At 5°F that is 1,800 Btu/h above the example heating load of 11,000 Btu/h; at 95°F it is 11,300 Btu/h above the example cooling load of 5,500 Btu/h.

Each bar is a separate certified test, drawn at its outdoor temperature, starting at zero. The 47°F figure is at normal speed; the 17 and 5°F figures are at full speed. The short dark line on each bar is the median of 1.5-ton central models, one value per model. The shaded 17 to 45°F band is the frosting range: the outdoor coil can frost, and the unit pauses to defrost.

The dashed lines are example loads for a typical area of about 450 sq ft where winters reach 5°F: heating runs from 11,000 Btu/h at 5°F to 0 at 65°F, and cooling runs from 0 at 65°F to 5,500 Btu/h at 95°F, at 1,000 sq ft per ton. A house in a hot climate or with large west-facing windows can need twice as much cooling. They are examples, not your building.

Calculate heating and cooling for your house

listed by MULTIMFG · certified Jul 1, 2025 · 1 pairing carries these values

Rebates where you live

Meets the recorded equipment thresholds of 54 programs in 34 states, provinces, or territories:Alabama (1), Arizona (1), California (3), Connecticut (3), Idaho (2), Illinois (1), Kansas (1), Kentucky (1), Maryland (3), Massachusetts (3), Michigan (2), Minnesota (3), Mississippi (2), Nevada (1), New Hampshire (2), New Jersey (3), New York (4), North Carolina (1), Oregon (2), Rhode Island (3), South Carolina (1), Tennessee (1), Texas (1), Utah (1), Vermont (3), Washington (2), Wisconsin (1), British Columbia (3), Manitoba (1), New Brunswick (1), Newfoundland and Labrador (1), Nova Scotia (2), Ontario (1), Yukon (2).

All 54 programs by state and province

Alabama

Arizona

California

Connecticut

Idaho

Illinois

Kansas

Kentucky

Maryland

Massachusetts

Michigan

Minnesota

Mississippi

Nevada

New Hampshire

New Jersey

New York

North Carolina

Oregon

Rhode Island

South Carolina

Tennessee

Texas

Utah

Vermont

Washington

Wisconsin

British Columbia

Manitoba

New Brunswick

Newfoundland and Labrador

Nova Scotia

Ontario

Yukon

Threshold comparisons use the unit’s median certified figures across its pairings, not the pairing selected above. Meeting these thresholds means the equipment may qualify; it does not guarantee approval. Service-area, installation, and product-list requirements also apply.

All rebate programs and their published thresholds

Certified output and power use

Certified output for the selected pairingThe four bars share one scale. The comparison is with the median of 1.5-ton central models. Heating tests run at 70°F indoors. The cooling test runs at 80°F indoors.
Outdoor temperature Certified outputBtu/h One scale vs class median COPat 5°F
5°Ffull speed 12,8003.75 kW +14% 2.20
17°Ffull speed 10,5003.08 kW −17% NR
47°Fnormal speed 16,8004.92 kW −7% NR
95°Fcooling, full load 16,8004.92 kW — NR

EER2 9.8 in that test. SEER2 15.5 over the modeled cooling season.

Power use at each temperature

Electrical input in the 5°F full-speed test
1.71kW
Electrical input in the 95°F cooling test
1.71kW
Seasonal average heating COP
2.67

These exclude backup resistance heat.

Updated Sep 19, 2026 · Methodology

How it compares with other 18,000 Btu heat pumps

1.5-ton central models

This pairing at 5°F
12,800 Btu/h
This unit at 5°F median across its pairings
12,800 Btu/h
Median of 1.5-ton central models at 5°F
11,200 Btu/h
Models in this group
243

This unit is above 53% of them, at number 115 of 243 by heat at 5°F. The middle half of the group runs 8,600 to 18,000 Btu/h.

This size class is defined by cooling capacity, so cooling is not compared here.

Among 18,000 Btu central models, each by its median certified pairing, highest first: 5°F output as a share of its 47°F rating, 104th of 243; HSPF2, 89th of 254 (tied). Models without that figure are left out.

Similar ratings at 47°F

These central models share the nominal cooling size. Comparisons use each model’s median certified figures across pairings.

  • N5HP5018A1: The same 16,800 Btu/h rating at 47°F; 8,900 Btu/h at 5°F (this model: 12,800).
  • 215SAN018**AA*: 16,700 Btu/h at 47°F (this model: 16,800); HSPF2 7.8 (this model: 9.1).
  • MOVA-18HN10-M152L: 16,600 Btu/h at 47°F (this model: 16,800); 7,500 Btu/h at 5°F (this model: 12,800).

Closest models by heat at 5°F

Every 18,000 Btu (1.5-ton) unit, ranked by cooling efficiency, then heating efficiency

Floor area at the cold test point

The median certified output of 12,800 Btu/h at 5°F matches the size calculator’s heating estimate for these floor areas, rounded to about 10 sq ft. Each range divides that output by the climate band’s heating rates.

Floor area by climate band and house condition
Climate bandHouse conditionBtu/h per sq ftApproximate sq ft
MildDrafty, little insulation24–42300–530
MildTypical16–26490–800
MildTight, well insulated10–18710–1,280
ColdDrafty, little insulation28–52250–460
ColdTypical18–30430–710
ColdTight, well insulated12–22580–1,070
Very coldDrafty, little insulation32–58220–400
Very coldTypical22–38340–580
Very coldTight, well insulated16–28460–800

This is an estimate, not a house-specific load calculation. Output stays at the 5°F test point for every band; it does not predict output at the band’s winter design temperature.

Certified values for 1824SPV0-HP-X-D

1 pairing · 0 AHRI certificates

This pairing is the one shown above. Under all pairings, a single figure means every pairing agrees and a range means the pairing decides.

This pairingAll pairings
Heating
Heat output at 47°F normal speed 16,800 Btu/h 16,800 Btu/h
Heat output at 17°F full speed 10,500 Btu/h 10,500 Btu/h
Heat output at 5°F full speed 12,800 Btu/h 12,800 Btu/h
Heat output below 5°F NR NR
Cold output 5°F output as a % of the 47°F rating 76%
COP at 5°F full speed 2.20 2.20
HSPF2 Region IV 9.1 9.1
Cooling
Cooling capacity at 95°F full-load test 16,800 Btu/h 16,800 Btu/h
EER2 at 95°F 9.8 9.8
SEER2 cooling season 15.5 15.5
Cooling at other temperatures NR NR
Equipment and listing
Refrigerant R-454B
Compressor Variable speed
Indoor unit None listed None
FurnaceNo furnace None
Cold-climate designation EPA's designation, as published Yes On every pairing
ENERGY STAR Most Efficient EPA's designation, as published No On no pairings
Where it is sold US and Canada US and Canada
Model string as certified 1824SPV0-HP-X-D

Pairings, by indoor-unit class

1 certified pairing

One row per indoor unit certified with this outdoor unit.

Unspecified

  1. None listed brand not stated 12,800 Btu/hat 5°F, full speed

    1 pairing · 47°F 16,800 Btu/h · 95°F cooling 16,800 Btu/h · Cold output 76% · COP 2.20

Indoor units in the unspecified class
Indoor unit Brand At 5°FBtu/h · full speed At 47°FBtu/h · normal speed At 95°FBtu/h · cooling Cold output% of 47°F rating COP 5°Ffull speed Cold climate Pairings
None listed — 12,800 16,800 16,800 76% 2.20 Yes 1

The share is heat output at 5°F divided by the 47°F rating.

Sold as, and units with identical certified values

Brands listing this model number

Model number as listed

  • 1824SPV0-HP-X-D 1 pairing

What affects the price

We don't have prices. These things drive the cost.

  • The size of the unit, and the indoor equipment on the same certificate.
  • Whether existing ductwork is reused, altered, or replaced.
  • The electrical work: a circuit, a disconnect, and sometimes a panel change.
  • Refrigerant line length and how the outdoor unit is mounted.
  • Permits and inspection, which vary by municipality.
  • Removing and disposing of the old equipment.
  • Local labor rates and how busy the season is.
  • Rebates and tax credits, which change and have deadlines.

Product history

  • 1824SPV0-HP-X-D first appeared in the certified data between June 2025 and August 2025.

History and definitions

History

First certified record
Most recent certified record
Measurements reported
Jul 1, 2025
Status
In the certified data

Field definitions

COP
Heat delivered for each unit of electricity used. A COP of 2.5 gives 2.5 times the heat of an electric baseboard heater.
HSPF2
Heating efficiency over a typical season. Higher uses less electricity.
SEER2
Cooling efficiency over a typical season. Higher uses less electricity.
EER2
Cooling output divided by electrical input in the 95°F full-load test, in Btu/h per watt.
Cold output
Heat output at 5°F as a percentage of the 47°F rating.
% of rating at 17°F
Heat output at 17°F as a percentage of the 47°F rating.

NR not in the certified dataNC not cold-climate certifiedSP single pairing onlyVP varies by pairing; see the pairings tableWD withdrawn since the certified data was last read

Cite or print this page

Heat Pump List, “1824SPV0-HP-X-D — certified heat output”. Certified figures dated , checked daily.
https://heatpumplist.com/model/1824spv0-hp-x-d