Heat Pump List
Menu

Sections

Tools

5WCZ5036A1

5WCZ5036A1 is in the certified data.

Its certified full-speed heating output at 5°F is 17,600 Btu/h, 53% of its 47°F rating across its certified pairings.

American Standard and Trane · central heat pump

All 88 certified American Standard models · All 104 certified Trane models

5WCZ5036A1 is in the certified data as of Sep 19, 2026.

Heating at 47°F

33,000

21,800 at 17°F

17,600 at 5°F

Btu/h, certified

2.00 COP at 5°F

Cooling at 95°F

35,200

Btu/h, certified

EER2 11.5 at 95°F

SEER2 15.2

Heating and cooling by outdoor temperature

Certified heating at 5, 17, and 47°F and cooling at 95°F for 5WCZ5036A1, by outdoor temperature Heating: 17,600 Btu/h at 5°F, 21,800 Btu/h at 17°F, 33,000 Btu/h at 47°F. Cooling: 35,200 Btu/h at 95°F. The bars start at zero. Median of 3-ton central models: 26,400 Btu/h at 5°F, 26,200 Btu/h at 17°F, 35,200 Btu/h at 47°F, 35,000 Btu/h at 95°F. 0 10,000 20,000 30,000 40,000 Btu/h 17,600 5°F 21,800 17°F 33,000 47°F 35,200 95°F Outdoor temperature (°F)
  • Heating output
  • Cooling output
  • Median of 3-ton central models
  • Example heating load
  • Example cooling load
  • Frosting range, 17 to 45°F

This pairing delivers 33,000 Btu/h of heat at 47°F, 21,800 Btu/h at 17°F, and 17,600 Btu/h at 5°F, 53% of its 47°F rating. It delivers 35,200 Btu/h of cooling at 95°F. At 5°F that is 8,900 Btu/h short of the example heating load of 26,500 Btu/h; at 95°F it is 22,200 Btu/h above the example cooling load of 13,000 Btu/h.

Each bar is a separate certified test, drawn at its outdoor temperature, starting at zero. The 47°F figure is at high stage; the 17 and 5°F figures are at full speed. The short dark line on each bar is the median of 3-ton central models, one value per model. The shaded 17 to 45°F band is the frosting range: the outdoor coil can frost, and the unit pauses to defrost.

The dashed lines are example loads for a typical area of about 1,100 sq ft where winters reach 5°F: heating runs from 26,500 Btu/h at 5°F to 0 at 65°F, and cooling runs from 0 at 65°F to 13,000 Btu/h at 95°F, at 1,000 sq ft per ton. A house in a hot climate or with large west-facing windows can need twice as much cooling. They are examples, not your building.

Calculate heating and cooling for your house

AHRI certificate 216574936 · listed by Trane · certified Sep 30, 2026 · 2 pairings on 2 certificates share these values

Rebates where you live

Meets the recorded equipment thresholds of 13 programs in 11 states, provinces, or territories:California (1), Idaho (1), Kansas (1), Maryland (3), Michigan (2), Minnesota (1), North Carolina (1), Oregon (2), South Carolina (1), Texas (1), Utah (1).

All 13 programs by state and province

California

Idaho

Kansas

Maryland

Michigan

Minnesota

North Carolina

Oregon

South Carolina

Texas

Utah

Threshold comparisons use the unit’s median certified figures across its pairings, not the pairing selected above. Meeting these thresholds means the equipment may qualify; it does not guarantee approval. Service-area, installation, and product-list requirements also apply.

All rebate programs and their published thresholds

Certified output and power use

Certified output for the selected pairingThe four bars share one scale. The comparison is with the median of 3-ton central models. Heating tests run at 70°F indoors. The cooling test runs at 80°F indoors.
Outdoor temperature Certified outputBtu/h One scale vs class median COPat 5°F
5°Fone compressor speed 17,6005.16 kW −33% 2.00
17°Fone compressor speed 21,8006.39 kW −17% NR
47°Fone compressor speed 33,0009.67 kW −6% NR
95°Fcooling, full load 35,20010.32 kW — NR

EER2 11.5 in that test. SEER2 15.2 over the modeled cooling season.

Power use at each temperature

Electrical input in the 5°F full-speed test
2.58kW
Electrical input in the 95°F cooling test
3.06kW
Seasonal average heating COP
2.26

These exclude backup resistance heat.

Updated Sep 19, 2026 · Methodology

How it compares with other 36,000 Btu heat pumps

3-ton central models

This pairing at 5°F
17,600 Btu/h
This unit at 5°F median across its pairings
17,600 Btu/h
Median of 3-ton central models at 5°F
26,400 Btu/h
Models in this group
451

This unit is above 17% of them, at number 375 of 451 by heat at 5°F. The middle half of the group runs 18,650 to 32,000 Btu/h.

This size class is defined by cooling capacity, so cooling is not compared here.

Among 36,000 Btu central models, each by its median certified pairing, highest first: 5°F output as a share of its 47°F rating, 351st of 451; HSPF2, 443rd of 467. Models without that figure are left out.

Similar ratings at 47°F

These central models share the nominal cooling size. Comparisons use each model’s median certified figures across pairings.

  • DHH0361********A*: 33,200 Btu/h at 47°F (this model: 33,000); 15,000 Btu/h at 5°F (this model: 17,600).
  • LRP15HPK36VP: 33,200 Btu/h at 47°F (this model: 33,000); 15,200 Btu/h at 5°F (this model: 17,600).
  • 4A6L9036A1: 33,200 Btu/h at 47°F (this model: 33,000); HSPF2 8.7 (this model: 7.7).

Closest models by heat at 5°F

Every 36,000 Btu (3-ton) unit, ranked by cooling efficiency, then heating efficiency

Floor area at the cold test point

The median certified output of 17,600 Btu/h at 5°F matches the size calculator’s heating estimate for these floor areas, rounded to about 10 sq ft. Each range divides that output by the climate band’s heating rates.

Floor area by climate band and house condition
Climate bandHouse conditionBtu/h per sq ftApproximate sq ft
MildDrafty, little insulation24–42420–730
MildTypical16–26680–1,100
MildTight, well insulated10–18980–1,760
ColdDrafty, little insulation28–52340–630
ColdTypical18–30590–980
ColdTight, well insulated12–22800–1,470
Very coldDrafty, little insulation32–58300–550
Very coldTypical22–38460–800
Very coldTight, well insulated16–28630–1,100

This is an estimate, not a house-specific load calculation. Output stays at the 5°F test point for every band; it does not predict output at the band’s winter design temperature.

Certified values for 5WCZ5036A1

2 pairings · 2 AHRI certificates

This pairing is the one shown above. Under all pairings, a single figure means every pairing agrees and a range means the pairing decides.

This pairingAll pairings
Heating
Heat output at 47°F high stage 33,000 Btu/h 33,000 Btu/h
Heat output at 17°F full speed 21,800 Btu/h 21,800 Btu/h
Heat output at 5°F full speed 17,600 Btu/h 17,600 Btu/h
Heat output below 5°F NR NR
Cold output 5°F output as a % of the 47°F rating 53%
COP at 5°F full speed 2.00 2.00
HSPF2 Region IV 7.7 7.7
Cooling
Cooling capacity at 95°F full-load test 35,200 Btu/h 35,200 Btu/h
EER2 at 95°F 11.5 11.5
SEER2 cooling season 15.2 15.2
Cooling at other temperatures NR NR
Equipment and listing
Refrigerant R-454B
Compressor Two-stage
Indoor unit None listed None
FurnaceNo furnace None
Cold-climate designation EPA's designation, as published NC NC
ENERGY STAR Most Efficient EPA's designation, as published Yes On every pairing
Where it is sold United States United States
Model string as certified 5WCZ5036A1

Pairings, by indoor-unit class

2 certified pairings

One row per indoor unit certified with this outdoor unit.

Unspecified

  1. None listed brand not stated 17,600 Btu/hat 5°F, full speed

    2 pairings · 47°F 33,000 Btu/h · 95°F cooling 35,200 Btu/h · Cold output 53% · COP 2.00

Indoor units in the unspecified class
Indoor unit Brand At 5°FBtu/h · full speed At 47°FBtu/h · high stage At 95°FBtu/h · cooling Cold output% of 47°F rating COP 5°Ffull speed Cold climate Pairings
None listed — 17,600 33,000 35,200 53% 2.00 NC 2

The share is heat output at 5°F divided by the 47°F rating.

Sold as, and units with identical certified values

Brands listing this model number

Other brands that list these model numbers

Model number as listed

  • 5WCZ5036A1 2 pairings

What affects the price

We don't have prices. These things drive the cost.

  • The size of the unit, and the indoor equipment on the same certificate.
  • Whether existing ductwork is reused, altered, or replaced.
  • The electrical work: a circuit, a disconnect, and sometimes a panel change.
  • Refrigerant line length and how the outdoor unit is mounted.
  • Permits and inspection, which vary by municipality.
  • Removing and disposing of the old equipment.
  • Local labor rates and how busy the season is.
  • Rebates and tax credits, which change and have deadlines.

Product history

  • 5WCZ5036A1 first appeared in the certified data between March 2025 and May 2025.

History and definitions

Other 5WCZ5 models by nominal cooling size: 5WCZ5048A1 (48,000 Btu), 5WCZ5060A1 (60,000 Btu).

History

First certified record
Most recent certified record
Measurements reported
Sep 30, 2026
Status
In the certified data

Field definitions

COP
Heat delivered for each unit of electricity used. A COP of 2.5 gives 2.5 times the heat of an electric baseboard heater.
HSPF2
Heating efficiency over a typical season. Higher uses less electricity.
SEER2
Cooling efficiency over a typical season. Higher uses less electricity.
EER2
Cooling output divided by electrical input in the 95°F full-load test, in Btu/h per watt.
Cold output
Heat output at 5°F as a percentage of the 47°F rating.
% of rating at 17°F
Heat output at 17°F as a percentage of the 47°F rating.

NR not in the certified dataNC not cold-climate certifiedSP single pairing onlyVP varies by pairing; see the pairings tableWD withdrawn since the certified data was last read

Cite or print this page

Heat Pump List, “5WCZ5036A1 — certified heat output”. Certified figures dated , checked daily.
https://heatpumplist.com/model/5wcz5036a1