Heat Pump List
Menu

Sections

Tools

MHP17042A-**A

MHP17042A-**A is in the certified data.

Its certified full-speed heating output at 5°F is 19,800–20,200 Btu/h, 51–52% of its 47°F rating, depending on the pairing.

Blueridge and MRCOOL · central heat pump

All 202 certified Blueridge models · All 110 certified MRCOOL models

MHP17042A-**A is in the certified data as of Sep 19, 2026.

5 certified pairings with 5 different figures. See all

Heating at 47°F

39,000

25,400 at 17°F

19,900 at 5°F

Btu/h, certified

2.08 COP at 5°F

Cooling at 95°F

41,000

Btu/h, certified

EER2 12.5 at 95°F

SEER2 15.2

Heating and cooling by outdoor temperature

Certified heating at 5, 17, and 47°F and cooling at 95°F for MHP17042A-**A, by outdoor temperature Heating: 19,900 Btu/h at 5°F, 25,400 Btu/h at 17°F, 39,000 Btu/h at 47°F. Cooling: 41,000 Btu/h at 95°F. The bars start at zero. Median of 3.5-ton central models: 33,000 Btu/h at 5°F, 31,000 Btu/h at 17°F, 44,000 Btu/h at 47°F, 44,000 Btu/h at 95°F. 0 10,000 20,000 30,000 40,000 50,000 Btu/h 19,900 5°F 25,400 17°F 39,000 47°F 41,000 95°F Outdoor temperature (°F)
  • Heating output
  • Cooling output
  • Median of 3.5-ton central models
  • Example heating load
  • Example cooling load
  • Frosting range, 17 to 45°F

This pairing delivers 39,000 Btu/h of heat at 47°F, 25,400 Btu/h at 17°F, and 19,900 Btu/h at 5°F, 51% of its 47°F rating. It delivers 41,000 Btu/h of cooling at 95°F. At 5°F that is 13,100 Btu/h short of the example heating load of 33,000 Btu/h; at 95°F it is 24,000 Btu/h above the example cooling load of 17,000 Btu/h.

Each bar is a separate certified test, drawn at its outdoor temperature, starting at zero. The 47°F figure is at one speed; the 17 and 5°F figures are at full speed. The short dark line on each bar is the median of 3.5-ton central models, one value per model. The shaded 17 to 45°F band is the frosting range: the outdoor coil can frost, and the unit pauses to defrost.

The dashed lines are example loads for a typical area of about 1,400 sq ft where winters reach 5°F: heating runs from 33,000 Btu/h at 5°F to 0 at 65°F, and cooling runs from 0 at 65°F to 17,000 Btu/h at 95°F, at 1,000 sq ft per ton. A house in a hot climate or with large west-facing windows can need twice as much cooling. They are examples, not your building.

Calculate heating and cooling for your house

AHRI certificate 210326032 · listed by MRCOOL · certified Oct 27, 2025 · 1 pairing carries these values

Rebates where you live

Meets the recorded equipment thresholds of 26 programs in 16 states, provinces, or territories:Colorado (1), Idaho (1), Kansas (1), Maryland (3), Michigan (2), Minnesota (2), Mississippi (1), Nevada (1), New Jersey (4), North Carolina (1), Oregon (2), Pennsylvania (3), South Carolina (1), Texas (3), Utah (1), Newfoundland and Labrador (1).

All 26 programs by state and province

Colorado

Idaho

Kansas

Maryland

Michigan

Minnesota

Mississippi

Nevada

New Jersey

North Carolina

Oregon

Pennsylvania

South Carolina

Texas

Utah

Newfoundland and Labrador

Threshold comparisons use the unit’s median certified figures across its pairings, not the pairing selected above. Meeting these thresholds means the equipment may qualify; it does not guarantee approval. Service-area, installation, and product-list requirements also apply.

All rebate programs and their published thresholds

Certified output and power use

Certified output for the selected pairingThe four bars share one scale. The comparison is with the median of 3.5-ton central models. Heating tests run at 70°F indoors. The cooling test runs at 80°F indoors.
Outdoor temperature Certified outputBtu/h One scale vs class median COPat 5°F
5°Fone compressor speed 19,9005.83 kW −40% 2.08
17°Fone compressor speed 25,4007.44 kW −18% NR
47°Fone compressor speed 39,00011.43 kW −11% NR
95°Fcooling, full load 41,00012.02 kW — NR

EER2 12.5 in that test. SEER2 15.2 over the modeled cooling season.

Power use at each temperature

Electrical input in the 5°F full-speed test
2.80kW
Electrical input in the 95°F cooling test
3.28kW
Seasonal average heating COP
2.29

These exclude backup resistance heat.

Updated Sep 19, 2026 · Methodology

How it compares with other 42,000 Btu heat pumps

3.5-ton central models

This pairing at 5°F
19,900 Btu/h
This unit at 5°F median across its pairings
19,900 Btu/h
Median of 3.5-ton central models at 5°F
33,000 Btu/h
Models in this group
222

This unit is above 16% of them, at number 187 of 222 by heat at 5°F. The middle half of the group runs 20,000 to 40,000 Btu/h.

This size class is defined by cooling capacity, so cooling is not compared here.

Among 42,000 Btu central models, each by its median certified pairing, highest first: 5°F output as a share of its 47°F rating, 144th of 222 (tied); HSPF2, 163rd of 224 (tied). Models without that figure are left out.

Similar ratings at 47°F

These central models share the nominal cooling size. Comparisons use each model’s median certified figures across pairings.

  • 5DCZ5042A1: The same 39,000 Btu/h rating at 47°F; HSPF2 7.2 (this model: 7.8).
  • DZ6VSA421EA: 40,000 Btu/h at 47°F (this model: 39,000); 30,600 Btu/h at 5°F (this model: 19,900).
  • RD16AY48AJVC: 40,000 Btu/h at 47°F (this model: 39,000); 22,000 Btu/h at 5°F (this model: 19,900).

Closest models by heat at 5°F

Every 42,000 Btu (3.5-ton) unit, ranked by cooling efficiency, then heating efficiency

Floor area at the cold test point

The median certified output of 19,900 Btu/h at 5°F matches the size calculator’s heating estimate for these floor areas, rounded to about 10 sq ft. Each range divides that output by the climate band’s heating rates.

Floor area by climate band and house condition
Climate bandHouse conditionBtu/h per sq ftApproximate sq ft
MildDrafty, little insulation24–42470–830
MildTypical16–26770–1,240
MildTight, well insulated10–181,110–1,990
ColdDrafty, little insulation28–52380–710
ColdTypical18–30660–1,110
ColdTight, well insulated12–22900–1,660
Very coldDrafty, little insulation32–58340–620
Very coldTypical22–38520–900
Very coldTight, well insulated16–28710–1,240

This is an estimate, not a house-specific load calculation. Output stays at the 5°F test point for every band; it does not predict output at the band’s winter design temperature.

Certified values for MHP17042A-**A

5 pairings · 5 AHRI certificates

This pairing is the one shown above. Under all pairings, a single figure means every pairing agrees and a range means the pairing decides.

This pairingAll pairings
Heating
Heat output at 47°F one speed 39,000 Btu/h 38,500–39,000 Btu/h
Heat output at 17°F full speed 25,400 Btu/h 25,200–25,600 Btu/h
Heat output at 5°F full speed 19,900 Btu/h 19,800–20,200 Btu/h
Heat output below 5°F NR NR
Cold output 5°F output as a % of the 47°F rating 51%
COP at 5°F full speed 2.08 2.02–2.12
HSPF2 Region IV 7.8 7.8
Cooling
Cooling capacity at 95°F full-load test 41,000 Btu/h 40,500–41,500 Btu/h
EER2 at 95°F 12.5 12.5–13.0
SEER2 cooling season 15.2 15.2–15.4
Cooling at other temperatures NR NR
Equipment and listing
Refrigerant R-410A
Compressor Single stage
Indoor unit MCVP49CNPA+TDR+TXV 2 indoor units
FurnaceMGM96SE090C4XA 5 furnaces
Cold-climate designation EPA's designation, as published NC NC
ENERGY STAR Most Efficient EPA's designation, as published No On no pairings
Where it is sold US and Canada US and Canada
Model string as certified MHP17042A-**A

Across 5 certified pairings with 2 indoor models: heat at 5°F 19,800 Btu/h with MCVP49CNPA+TDR+TXV to 20,200 Btu/h with MCHP48BNPA+TDR; HSPF2 7.8 throughout; SEER2 15.2 with MCHP48BNPA+TDR to 15.4 with MCVP49CNPA+TDR+TXV. Endpoints name one indoor model where recorded; the furnace pairing can also change the figures.

Pairings, by indoor-unit class

2 indoor units · 5 certified pairings

One row per indoor unit certified with this outdoor unit.

Furnace paired · 2 indoor units

  1. MCVP49CNPA+TDR+TXV brand not stated 19,850 Btu/hat 5°F, full speed

    4 pairings, 4 with a furnace · 47°F 38,750 Btu/h · 95°F cooling 41,000 Btu/h · Cold output 51% · COP 2.09

  2. MCHP48BNPA+TDR brand not stated 20,200 Btu/hat 5°F, full speed

    1 pairing, 1 with a furnace · 47°F 39,000 Btu/h · 95°F cooling 40,500 Btu/h · Cold output 52% · COP 2.02

Indoor units in the furnace paired class
Indoor unit Brand At 5°FBtu/h · full speed At 47°FBtu/h · one speed At 95°FBtu/h · cooling Cold output% of 47°F rating COP 5°Ffull speed Cold climate Pairings
MCVP49CNPA+TDR+TXV — 19,850 38,750 41,000 51% 2.09 NC 4
MCHP48BNPA+TDR — 20,200 39,000 40,500 52% 2.02 NC 1

The share is heat output at 5°F divided by the 47°F rating.

Showing 2 of 2 indoor units

Sold as, and units with identical certified values

Brands listing this model number

Model number as listed

  • MHP17042A-**A 5 pairings

What affects the price

We don't have prices. These things drive the cost.

  • The size of the unit, and the indoor equipment on the same certificate.
  • Whether existing ductwork is reused, altered, or replaced.
  • The electrical work: a circuit, a disconnect, and sometimes a panel change.
  • Refrigerant line length and how the outdoor unit is mounted.
  • Permits and inspection, which vary by municipality.
  • Removing and disposing of the old equipment.
  • Local labor rates and how busy the season is.
  • Rebates and tax credits, which change and have deadlines.

History and definitions

Other MHP170 SERIES models by nominal cooling size: MHP17018A-**A (18,000 Btu), MHP17024A-**A (24,000 Btu), MHP17030A-**A (30,000 Btu), MHP17036A-**A (36,000 Btu), MHP17048A-**A (48,000 Btu).

History

First certified record
Most recent certified record
Measurements reported
Oct 27, 2025
Status
In the certified data

Field definitions

COP
Heat delivered for each unit of electricity used. A COP of 2.5 gives 2.5 times the heat of an electric baseboard heater.
HSPF2
Heating efficiency over a typical season. Higher uses less electricity.
SEER2
Cooling efficiency over a typical season. Higher uses less electricity.
EER2
Cooling output divided by electrical input in the 95°F full-load test, in Btu/h per watt.
Cold output
Heat output at 5°F as a percentage of the 47°F rating.
% of rating at 17°F
Heat output at 17°F as a percentage of the 47°F rating.

NR not in the certified dataNC not cold-climate certifiedSP single pairing onlyVP varies by pairing; see the pairings tableWD withdrawn since the certified data was last read

Cite or print this page

Heat Pump List, “MHP17042A-**A — certified heat output”. Certified figures dated , checked daily.
https://heatpumplist.com/model/mhp17042a-_st_sta